New Items

Hydro Power Generation Trainer can work in both off-grid and on-grid modes. It consists of a 3-phase synchronous generator moved by a real Pelton turbine. The trainer simulates real water flow using a pump. With the manually controlled valves, it allows to simulate different water flow and head pressure and investigate the generator performance in different conditions. In off-grid mode, it allows investigating the supply of local loads, as well as voltage and frequency regulation. In on-grid mode, it allows implementing the synchronization with the mains power grid.

Wind Power Generation Trainer can work in both off-grid and on-grid modes. It consists of a wind tunnel and a real wind turbine generator set. The trainer allows to simulate real wind and investigate the generator performance in different wind speeds. In off-grid mode, it allows to investigate the battery charging process using an AC charge controller and also the discharge using an AC-DC Inverter and loads. In on-grid mode, it allows implementing the synchronization with the mains power grid.

Solar Power Generation Trainer can work in both off-grid and on-grid modes. It consists of a PV panel and an array of halogen lamps as a sun simulator. The positions of both the PV panel and Sun Simulator can be controlled manually using joysticks and also from the software. The trainer also has a dual-axis solar tracking system. The trainer allows to simulate real light, daytime, year time and investigate the PV performance in different irradiation. In off-grid mode, it allows to investigate the battery charging process using a DC charge controller and also the discharge using an AC-DC Inverter and loads. In on-grid mode, it allows implementing the synchronization with the mains power grid using a Grid-tie inverter.

(Stainless Steel) Capacity 1000 ml. with lid,drain cock, stainless steel sieve on 3-legged stand, Jointless.

Reinforced stainless steel sieve fixed in a wooden frame size 9” x 7” and mesh size 10, 12 or 20 (any one size)

A compact unit built on a metal platform, withgeared motor which revolves a drum and contains a stainless steel vessel (capacity 2 kg) and the drum rotates on brackets. Complete with set of balls, main lead and plug. Works on 220 volts AC.

PROBE POINTED WITH TOUNGE TIE
CODE: SS-1147   



MICHEL
CODE : SS-1148 

• 12.5 cm

 

NELSON HYDROCELE
CODE : SS-1149

Laboratory size, hammer type, with 1/2 H.P. heavy duty motor (Single phase 220 volts, 50 c/s A.C.) Consists of four steel hammers fixed to a disc of 75 mm. dia., 37mm. thick trough which passes a shaft being received at 3000 rpm. The hammers are enclosed in a CI drum, the sides and upper surface of which are roughened and the inner surface is undulaing. The lower part of the drum is made up of detachable screen (sieve) of different mesh size (a set of three sieves of course, medium and fine is supplied). Hopper is made of heavy gauge M.S. Sheet.

Hydrogen Fuel Cell Trainer can work in off-grid mode. It consists of a hydrogen cylinder, PEM fuel cell stack, DC-DC converter, load, pressure meter, flow meter, etc. The trainer allows investigating the main principles of fuel cell operation and its characteristics. The students will learn how hydrogen and air reactions can produce electrical energy.
The fuel cell stack uses ambient air. The hydrogen cylinder should be refilled with 99.99% purity hydrogen by the user.

Product Details:

Conventional Type - Portable, vertical seamless deep drawn autoclave to withstand high pressure wherein the body and lid are locked together against a rubber gasket by 6 swivel bolts with large hand wheels.

 

A fairly handy instrument for taking quick readings for the hardness of tablets. It is made of brass turned parts, heavily chrome plated, the scale is 0 to 20 kg and the index mark and division is in 1 kg reading. Scale adjustable for zero setting as per size of the tablets.

A quick and convenient device for 100 tablets of 9.5 mm preformations. Made of aluminum sheet and providedwith a pouring lip and handle.

Hand lever sliding movement with toothed jaws, spring action release of jaws and a robust construction.

Extra heavy for making tinctures, decotions, infusions etc., capacity 1 litre, stainless, steel disc with screw driver and a stainless steel inner perforated vessel.

fitted with hardened grinding discs, provision for coarse and fine grinding

Simple syringe type,motordriven, giving ten ampules per minute, capacity of filling adjustable from 1ml. to 10 ml. by a cam lever arrangement. Automatic intake and outflow of fluid. It consists of a glass fusing burner for L.P.G. or petroleum gas.

CHEVALIER JACKSON

Grassing Forceps

EXTRA FINE CROCODILECODE: SS-1155    

• JAW Serrated Forceps 35 cm<

YEOMAN BIOPSY FORCEPS

• 35.5 cm SS-1156
• 25.5 cm SS-1156A