Fluid Machinery

Product Details:

The apparatus consists of a Nozzle Meter Apparatus. The flow can be regulated by the valve provided at the down stream.

Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in the water line to conduct the experiment on different flow rates. A flow rate of water is measured with the help of measuring tank and stopwatch.

 

EXPERIMENTATIONS:

To measure discharge through Nozzle meter and to calibrate it.

 

Utilities required:

Water Supply.

Drain.

 

Product Details:

¨ Nozzle meter: Nozzle of Stainless Steel, Housing of Clear Acrylic.

Compatible with 1”dia pipe.

¨ Water Circulation: EHP Pump, Crompton/Standard make.

¨ The whole set-up is well designed and arranged in a good quality painted structure.

Product Details:

We are leading suppliers of Fluid Mechanics Lab Equipment.

1. Pitot Static Tube Set-Up
2. Venturimeter Orificemeter & Rotameter Apparatus
3. Reynold's Apparatus
4. Metacentric Height Apparatus
5. Nozzle Meter Apparatus
6. Notch Apparatus
7. Orifice Mouthpiece Apparatus
8. Friction In Pipe Lines Apparatus
9. Bernoulli's Theorem Apparatus
10. Venturimeter & Orificemeter Apparatus
11. Study of Pipe Fittings
12. Impact Of Jet On Vanes Apparatus

Product Details:

Reckoned as leaders in this industry, we are providing our esteemed clients excellent quality Francis Turbine Test Rig. The offered range is manufactured using high-grade raw materials and contemporary technology. We assure our clients that our range is quality tested on predefined parameters, in order to meet international standards. Apart from this, our prestigious clients can avail offered range, as per their needs, at highly competitive prices.

Features:

• Easy to operate
• Smooth performance
• Less power consumption

Product Details:

We are the leading suppliers of Fluid Machinery Lab Equipment.

1. Pelton Wheel Turbine Test Rig
2. Gear Pump Test Setup
3. Single Stage Air Compressor Test Rig
4. Double Stage Air Compressor Test Rig
5. Centrifugal Pump Test Rig
6. Mechanical Engineering Lab Equipment
7. Francis Turbine Test Rig
8. Hydraulic Ram Test Setup
9. Kaplan Turbine Test Rig
10. Reciprocating Pump Test Rig

Product Details:

BASIC HYDROLOGY SYSTEM APPARATUS - ScFm150

BASIC HYDROLOGY APPARATUS INDIA From Scientico is consist of A stainless steel tank with tilting mechanism. Two side compartments, two wells, and eight sprinkler nozzles. Complete with storage tank, pump, flow meter, and calibrated weir, and sand all stainless steel powered coated

Product Details:

Backed by a team of adroit professionals, we are manufacturing, exporting and supplying Pelton Wheel Turbine Test Rig. Designed with utmost precision, this test rig is manufactured from quality proven raw materials that ensure high strength and durability. Moreover, our clients can avail offered range in several specifications in accordance with clients’ requirements. Owing to their quality, offered range is highly appreciated around the globe as it is manufactured as per international standards.

Features:

• Optimum performance
• Longer service life
• Maintenance free

Specifications:

• Rated Supply Head: 25 meters
• Discharge: 500 lpm
• Normal Speed: 1000 rpm
• Power Output: 1 HP
• Jet Diameter: 22mm (maximum)
• Pitch Circle Diameter: 260 mm
• Jet Ratio: 12 approx

Product Details:

Features:* Self contained water circulation unit.* Pump giving adequate flow for meaningful experiments.* Service Required:Electrical supply - Single Phase, 2.0 H.P. Cap* Comprehensive Instruction Manual covers experiment presented in the form of a fulllaboratory report.* The inside surface of the tank is provided with FRP to minimize the problem ofcorrosion.Description:Apparatus consists of a close circuit through which water is circulated continuously bymeans of a centrifugal pump of 50mm x 50mm with 2.0 H.P. motor to make the supplyfrom sump tank.sump tank of suitable capacity fabricated on M.S. angle frame with M.S. sheet isprovided. Inside of the tank is lined with FRP. A drain valve of 15mm size is provided inthe bottom of the tank.The set up consists of a tilting flume 25cm wide, 30cm deep and with a stabilizing tank.The total length of flume is about 4.0m. For visual observation of flow pattern along theflume section, both sides of flume are provided with transparent perspex sheet about 1.0m long. The upstream and downstream sections are provided with adjustable gates withrack and pinion arrangement. In a portion of flume one can fix model of broad crestedweir made of M.S. sheet.The channel is provided with pipe railing in full length between the gates) for themovement of pointer gauge trolley. A pointer gauge 50cm long is provided to measurethe head of water over the model. The trolley is supported on four wheels for easyrunning on the railing. The channel is having screw jack operated to give slope of 2% inupstream and downstream sides.Discharge of water can be collected by the help of a calibrated Orificemeter which isconnected with two pressure gauges.Necessary G.I. piping system & flexible pipe of suitable size, necessary fitting andcontrol valve are provided with the apparatus.

Product Details:

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by offering Gear Pump Test Setup. Designed with utmost precision, the offered test setup is manufactured using optimum quality raw materials and advanced technology. In addition to this, our offered range undergoes various tests under the supervision of quality controllers, in order to ensure its flawlessness. Besides, this is available as per clients’ specifications.

Features:

• Rugged design
• Rust free
• Precisely engineered

Specifications:

• Material: Genuine material
• This pump can convey oil with viscosity: 1-8 °E, with temperature 10-50 °C

Product Details:

Single Stage Air Compressor Test Rig consists of a single reciprocating type air compressordriven by 1 HP motor through a belt. The output of the air compressor is connected to reservoir(Tank) and suction is connected to another air tank with a calibrated orifice plate and a watermanometer. Bellow is fitted on one side of this air tank to regulate the flow. Temperature ofinlet and outlet of air pressure at outlet can be measured by thermometer and pressure gauge.
EXPERIMENTS:• To calculate the volumetric efficiency• To calculate isothermal HP• To calculate compression ratio
UTILITIES REQUIRED:• Electricity 2Kw, 220VAC, Single Phase• Floor Area 1.5 X 0.75 m• Tachometer for R.P.M measurement
TECHNICAL DETAIL:• Compressor : Single Stage, Capacity 4.5 CFM (max.)Working Pressure 5 kg/cm2 max.• Drive : 1 HP Standard make motor.• Manifold Measurement : Suitable Capacity.• Flow Measurement : Orificemeter with Manometer.• Temp. Measurement : Thermometer 2 Nos.• Air Tank : Capacity 120 ltrs. With safety valve, shut offvalve.• Pressure Gauge : Bourdon Type.• RPM Measurement : Digital Tachometer, Non-contact type.• Control Panel : Energy measurement, Electronic Energymeter, L&T make.MCB : For over load protection.On/OFF Switch, mains Indicator, etc.• The whole set-up is well designed and arranged in a good quality painted structure.

Product Details:

Hydraulic Bench

The present set-up is a self-contained, water re-circulating unit provided with a top tray and a sump tank. Various hydraulics experiments can be conducted on this setup. An FHP Centrifugal pump is fitted for water circulation. Flow control valve and by-pass valve are fitted in the water line to conduct the experiment on different flow rates. The flow rate of water is measured with the help of measuring tank and stopwatch. Water is measured with the help tray from experimental set-up, drains and return to the sump tank.

SCOPE OF EXPERIMENTATION:

Following experiments can be carried out with common basic table, with separate experimental set-ups (supplied at extra cost), which can be connected to the hydraulic bench with a flexible pipe:

Bernoulli’s Theorem Apparatus

Flow measurement by Venturi meter

Flow measurement by Orificemeter

Flow over Notches and Weirs

Orifice and Mouth Piece

Losses in Pipe Bends

Impact of the jet on Vanes

Study of Pressure Measurement

Pitot Static Tube

Free & Forced Vortex Apparatus

UTILITIES REQUIRED:

Water Supply.

Drain.

 

Product Details:

¨ Water Circulation: 1 HP Pump, Crompton/ Kirloskar make.

¨ Stop Watch: electronic.

¨ Tanks and Top Tray will be made of Stainless Steel.

¨ The whole set-up is well designed and arranged in a good quality painted structure.

Product Details:

We are offering a wide range of Venturimeter Orificemeter & Rotameter Apparatus which are used for experiment also has a number of straight tube manometers at equally spaced intervals.

Product Details:

To meet the diversified requirements of our prestigious clients, we are engaged in offering Bernoulli's Theorem Apparatus. Provided apparatus is available in a wide variety of specifications as per the exact requirements of clients. Manufactured as per international standards using the best quality raw materials and sophisticated technology under the guidance of our expert team, it is highly demanded. In addition to this, clients can avail offered apparatus from us in customized options at market leading prices.

Features:

• Hassle-free operations
• Compact design
• Excellent performance

Product Details:

Being a client-centric organization, we are engaged in offering a wide array of Hydraulic Ram Test Setup. Our skilled professionals manufacture this test setup, from high quality raw materials, using the latest technology. Ahead of their final dispatch, our offered product is thoroughly checked by our quality analyzers on varied quality parameters. Clients can avail the provided range from us at market leading prices.

Features:

• Corrosion resistance
• Low maintenance
• High performance

Specifications:

• Rated Supply Head: 25 meters
• Normal Speed: 1000 rpm
• Power Output: 1 HP

Product Details:

Two stage Air Compressor Test Rig consists of a double stage reciprocating type air compressordriven by 2 HP Motor through a belt. The outlet of the air compressor is connected to reservoir(Tank) and suction is connected to another air tank with a calibrated orifice plate and a watermanometer, Bellow is fitted on one side of the air tank to regulate the flow. Temperature ofinlet air, after single compression, inlet and outlet of second compression and pressure inreservoir and at intermediate stage can be measured by thermometers and gauges.EXPERIMENTS:• To calculate the volumetric efficiency• To calculate isothermal HP• To calculate compression ratioUTITLOES REQUIRED:• Electricity 3 kW, 220V AC, Single Phase• Floor Area 1.5 x 0.75 m• TachometerTECHNICAL DETAILS:• Compressor : Double Stage, Double Cylinder Cylinder Capacity 9 CFM max.Working Pressure 15 kg/cm2 max.• Make : Toyo/Sony/ELGI / standard available• Drive : 2 HP• Spring Balance : Dial type.• Manifold Tank : Suitable capacity.• Flow Measurement : Orificemeter with Manometer• Temperature Sensors : RTD PT : 100 type• Air Tank : Capacity 145 liters with valve, Shut off valve• Pressure Gauge : Bourdon type• Control Panel : RPM measurement RPM indicator with Proximity sensor,Energy measurement Energy meter, MCB For over loadProtection, Digital Temp. Indicator : 0-199.9°c, with multi-Chanel switch, on/off switch, Mains indicator etc.The whole set-up is well designed and arranged in a good quality Painted structure

Product Details:

We have gained recognition as an eminent enterprise, devotedly engaged in offering a broad range of Reynold's Apparatus. Backed by a team of experts, offered apparatus is manufactured using optimum quality raw materials and advanced technology. Our offered range is precisely designed, in order to meet the international standards. Furthermore, this apparatus is availed in various specifications, as per the varied needs of our valuable clients. Our range is stringently tested on various parameters to assure it on counts of quality.

Features:

• Longer operational life
• Corrosion-resistance
• Rugged design

Product Details:

We are engaged in offering Reciprocating Pump Test Rig. Our skilled professionals manufacture these test rigs from high quality raw materials, using the latest technology & according to international standards. Before their final dispatch, our offered test rig is thoroughly checked by our quality analyzers on varied quality parameters. Available with us in a customized options, it is highly demanded in the market.

Features:

• Corrosion resistance
• Low maintenance
• High performance

Specifications:

• Normal Speed: 1000 rpm
• Power Output: 1 HP

Product Details:

Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a Gennan Engineer. This turbine issuitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the jdischarge (Q) must increase to produce the same power.The present set up consist of a scroll casing housing a runner. Water enters the turbine through the stationery guidevanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. Thewater is fed to the turbine by means of centrifugal pump. The runner is directly mounted on one end of a central SSshaft and other end is connected to a break arrangements. A transparent hollow cylinder made of acrylic is fitted inbetween the draught tube and the casing for observation of flow on the airfoil vanes. This runner assembly issupported by thick cast iron pedestal. Load is applied to the turbine with the help of this brake arrangement so thatthe efficiency of the turbine can be calculated. The set-up is complete with guide mechanism. Pressure and vacuumgauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.
EXPERIMENTS:• To study the operation of a Kaplan Turbine.• To determine the Output Power of Kaplan Turbine.• To determine the Turbine Efficiency.
UTILITIES REQUIRED:• Water supply and Drain• Electricity 15 kw, 440V AC, Three Phase• Floor Area 1.5 X 0.75 m
TECHNICAL DETAILS:MODEL SC-12 (1.33HP)Output Power 1.33 HP/1 KwDischarge 1500 LPM (Appox.)Supply Head 5 mRope Brake Dynamometer Dia 200 mm.Sump Tank Capacity 600 LtrsWater CirculationCentrifugal PumpCapacity 5 HP,Three PhaseSpeed 1500 RPM(Approx.)Runner With adjustable curved vanesDischarge Measurement Pilot Tube with ManometerControl Panel Star/delta starter, Mains Indicator, MCB for overload ProtectionTanks will be made of Stainless SteelThe whole set-up is well Designed and arranged in a good quality painted structure

Steam Turbine Test Rig from Scientico (1 KW) consist a impulse turbine all important components for proper education expertiments
These Setups by Scientico are used for Proper experimentation, research and educational purposes

Additional Information:

• Item Code: FMST-1001