Chemical Reaction Engineering Lab

Product Details:

Product Details:

Isothermal Batch Reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.

The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90 C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette

Experiments

• To study the progress of a Chemicals reaction and determine the kinetic parameters
• To determine the effect of temperature on Reaction Rate Constant

Utilities Required

• Water Supply & Drain
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Additional Information:

• Production Capacity: 500
• Delivery Time: 30 days

Product Details:

The set-up is designed to demonstrate and study the vapor-liquid equilibrium. As basic data of any distillation problem is the equilibrium between the liquid and vapor phases of the system subjected to distillation. Hence it is of great importance to study the VLE.
The set-up consists of distillation still with a heating element, shell & tube condenser, reflux & distillate section. A tank with the pump is provided to circulate cold water to the condenser. Flow rates can be regulated through control valve fitted. Instrumentation is done to measure the temperatures at different points.

A Digital Temp. The controller is connected to the heating element for precisely controlling & varying heat input. The vapors from the top of the column are condensed in the shell and tube type condenser by circulating cooling water. The condensate is collected in reflux drum and feedback to the column as reflux.

EXPERIMENTS:

To determine the vapor Liquid Equilibrium curve for CCl4 and Toluene or any other mixture.

FEATURES:

Superb Painted structure
Simple to operate & maintain
Compact & stand-alone set up

UTILITIES REQUIRED:

Water Supply & Drain
Refractometer for Analysis
Required Chemicals


Product Details:
Product
VAPOR-LIQUID EQUILIBRIUM MT 22
Distillation still
MOC SS / Glass 1 Ltrs. Capacity. Insulated by ceramic wool & Nichrome wire Heating Mental
Condenser
Concentric Tube type
Cooling Water Tank
Water Circulation
FHP pump, Arrangement is done to vary & measure the flow rate.
Temp. Measurement
Control panel
Indicator: 0-199.9°C, with multi-channel switch, On/off switch, Mains Indicator etc.

Product Details:

The lab introduces the budding techies to the separation equipment in the process industry and provides a Mass Transfer Training Equipment.

Product Details:

In an ideal Continuously Stirred Tank Reactor, the contents of the reactor are well mixed and have a uniform composition throughout. Thus the exit stream has the same, composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition.

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. The CSTR is fitted with a stirrer for proper mixing. From the top outlet of it, samples are collected for analysis

Experiments

• Saponification Reactor studies in CSTR
• To determine the Reaction Rate Constant

Features

• Continuous operation
• Superb Painted structure
• Simple to operate & maintain
• Compact & stand-alone set up
• Soundless Stirrers

Utilities Required

• Water Supply & Drain
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Product Details:

We are one of the prominent manufacturers, suppliers, traders, and exporters of UV Photo-Reactor. Manufactured as per the industry set standards, these UV photo reactors are commonly used in various chemical engineering reactions.

These reactors are manufactured using the latest tools and equipment to ensure high standards of quality.